Xbox One: How to fix black screen on startup - Ultimate Guide

The glitches are usually present on all devices and Xbox One is no different, let's see How to fix black screen on startup.


Sometimes we panic before this type of screen because it is usually related to a possible death of the console, however, this is not necessarily entirely true, in this sense, knowing How to fix the black screen at startup allows us apply some solutions to solve this error, for our good fortune there are different methods to apply to respond to the error, it is possible that it is the product of some simple malfunction, but on many occasions it can become alarming if we have no idea where this problem is triggered .

Knowing how to fix the black screen at startup is a necessary task and before going fully into the solutions that can be applied, it is good to keep in mind that this problem can occur due to the lack of configuration of the television, however, the lack of updates of the Xbox One could cause us this type of inconvenience and in this sense, it is necessary to have our updated console, Xbox Live interruptions or the lack of loading of the Xbox board can be added to the causes that cause this error and thinking about it We invite you to read this guide in order to solve the error and continue enjoying everything this console has for you.

How to fix black screen on startup in Xbox One?

There are different solutions to apply and this implies:

Check the connection between the TV and the console, so knowing how to fix the black screen at startup leads us to try the following
Read Also:

• How to Fix Xbox App Error 0x80070426 on PC
• How to fix Xbox error message 0x80830003

• Check that the television and the Xbox One are turned on.
• Verify that the HDMI cable is properly plugged into the HDMI port on both the TV and the console.
• Check that the TV is configured with the HDMI input signal.
• Use a different HDMI cable to connect the TV with the Xbox One in order to correct if it is the cable that we are using that is causing the error.
• Connect our console to a different television.
• Power cycle the console, which involves pressing the power button for 10 seconds to power off and then power on once more to verify that this fault has been cleared.

There is the possibility of executing a complete reset of the Xbox One to solve this error, this in the event that the solutions described above have not solved the problem, so that knowing How to fix the black screen at startup leads us to apply this fix that implies :

• If necessary, disconnect the network cable and proceed to turn off the Xbox One.
• Next, we unplug the power cord and wait about 30 seconds or so to plug the power cord back in.
• Next, we will hold down the BIND button which is usually located on the left side of the console and the EJECT button which is located on the front of the console, then press the Xbox button.
• We must keep BIND and EJECT pressed for a period of about 15 seconds or so until we hear two ignition coughs and after the second beep we will release the buttons that we have pressed.

Note: In the event that your Xbox One is S All Digital Edition, it is necessary to hold down the Xbox button and the Link button, this is because this console does not have an eject button.

When the console restarts we are allowed to see that it starts in a low resolution mode equal to 640x480, then to know how to fix the black screen at startup it is necessary to reset these values ​​and for this we must:

• Go to system.
• Then locate Settings.
• Next, we look for Display and Sound.
• To finish we select Video output and that's it.

This is all we know so far about How to fix the black screen at startup, however, if you do not get an affirmative answer, it is ideal to contact the Xbox support area and thus continue enjoying Xbox One.