By
Angel Marquez
2023-03-29 20:52:15

Read this article in: Espanol | Francais | Deutsch | Portugues | Italiano



Our easy-to-follow guide will help you How to Fix The Last of Us Part 1 Controller Not Working on PC and get back to gaming in no time. Check it out now!


The Last of Us Part 1 Controller Not Working on PC is a common issue that has been reported by many users. This issue is mainly caused due to compatibility issues between the game and the controller. Fortunately, it can be fixed by following a few simple steps. 

Troubleshooting Steps




Read Also:

The steps given below should help you fix The Last of Us Part 1 Controller Not Working on PC: 

  • Reboot the PC: The first step towards fixing the controller issue is to reboot the PC and then try running the game again. This will help reset all the settings and hopefully will fix the issue. 
  • Reconnect your Controller/Joystick: If you are using a wired controller, try disconnecting and then reconnecting it to the PC. If you are using a wireless controller, try connecting it directly to the PC instead of via a USB hub.
  • Unplug Mouse/Keyboard or Other Peripherals: If you have other peripherals connected to the PC, such as a mouse or keyboard, disconnect them and then try running the game. This will help eliminate any conflicts between the controller and the other peripherals. 
  • Press the Alt+Enter keys: Hold down the Alt and Enter keys simultaneously when you are in the game. This will switch the game to a windowed mode. 
  • Launch Steam in Big Picture Mode: Launch the Steam client in Big Picture Mode and then run the game. This will help ensure that the controller is properly detected. 
  • Switch the Screen Refresh Rate to 60Hz: If you are using a high refresh rate monitor, try switching it to a lower refresh rate, such as 60Hz. This will help ensure that the controller works properly. 
  • Launch the Game in Windowed Mode using the Config file: If the game does not launch in windowed mode, you can try launching it using the config file. This will help ensure that the controller is properly detected. 
  • Enable Steam Overlay: Enable the Steam Overlay in the game so that you can use the controller while playing. This will help ensure that the controller works properly. 
  • Configure the Steam General Controller Settings: Open the Steam settings and then go to the Controller tab. Here, you can configure the controller settings. 
  • Select High Performance in Graphics Settings: Select the High Performance option in the Graphics Settings of the game. This will help ensure that the controller works properly. 
  • Uncheck Controller in Steam Controller Settings: Open the Steam settings and then go to the Controller tab. Here, uncheck the Controller option. This will help ensure that the controller is properly detected. 
  • Disable/Enable Steam Input: You can try disabling and then enabling the Steam Input option in the game. This will help ensure that the controller works properly. 
  • Use Steam Input Per Game Settings as Forced On or Forced Off: Open the Steam settings and then go to the Controller tab. Here, you can change the Steam Input Per Game Settings to Forced On or Forced Off. This will help ensure that the controller works properly. 



The Last of Us Part 1 controller not working on PC can be fixed by following the various troubleshooting steps outlined in this article. It is important to remember to always reboot the PC before attempting any of the other steps, as this can help resolve some controller issues. Additionally, ensure that the controller is securely connected, that the screen refresh rate is set to 60Hz, and that Steam Overlay is enabled. Finally, try configuring the Steam General Controller Settings, disabling and re-enabling Steam Input, and using Steam Input Per Game Settings as Forced On or Forced Off. By following these steps, players should be able to resolve any controller issues with The Last of Us Part 1 on PC.