How to Fix Wo Long Fallen Dynasty controller not detecting

Angel Marquez

2023-03-05 17:51:50

Find out How to Fix Wo Long Fallen Dynasty controller not detecting your console.

Do you have a Wo Long Fallen Dynasty controller that is not detecting your console? It’s one of the most common issues with gaming controllers, but luckily there are some easy fixes that may help solve the issue. In this guide, we’ll go over the steps you can take to troubleshoot and fix this issue.

The Wo Long Fallen Dynasty controller is a popular gaming controller for the PlayStation 4. It’s a reliable and comfortable controller that has been around for a few years. However, some users have reported that their controllers are not detecting their PlayStation 4 consoles. This is a common issue that can be easily fixed by following the steps outlined in this guide.

Check the Connection

The first step to troubleshooting this issue is to check the connection between your controller and your PlayStation 4 console. Make sure that the cable is properly connected to both the controller and the console. If the cables are loose or not properly connected, then your controller may not be detected by the console.

If the cables are properly connected, then try plugging them in and out several times to make sure that they are secured. If the cables are properly connected but your controller still isn’t being detected by the console, then try rebooting the console.

Reboot the Console

Rebooting the console can help reset the connections and help your controller detect the console. To reboot your PlayStation 4, hold down the power button for at least 7 seconds. This will turn off the console and it will take a few minutes to fully restart. Once the console has restarted, try connecting your controller again.

Update the Firmware

If the controller is still not detecting your console, then it may be due to an outdated firmware. To update the firmware, go to the PlayStation 4 Settings menu and select the “Update System Software” option. This will allow you to update the system software and help get your controller connected to the console again.

Replace the Batteries

Reset the Controller

If the controller is still not detecting the console, then try resetting the controller. To do this, hold down the “Share” and “PS” buttons for at least 7 seconds. This will reset the controller and it should be able to connect to the console again.

Try a Different Controller

If all else fails, you can try using a different controller to connect to the console. This will help determine if the problem is with the Wo Long Fallen Dynasty controller itself or if there is something wrong with the console.

Check the Console Ports

Finally, if your controller is still not detecting the console, then you should check the console ports. Make sure that all of the ports are clean and free of dust and debris. If the ports are dirty, then clean them with a can of compressed air or a cotton swab dampened with rubbing alcohol.

Perform a Factory Reset

The first step in fixing your Wo Long Fallen Dynasty controller not detecting is to make sure the controller is properly connected. Check the back of your controller for any loose or disconnected wires, and make sure that all of the connections are securely in place. Additionally, make sure the USB cable is plugged into your console and that the controller is powered on.

If everything looks good, then the next step is to try restarting your console. This can often fix the issue, as it can reset the connection between your console and the controller. You may need to restart the controller as well, so be sure to press the ‘Reset’ button on the back of the controller.

If the issue persists, then you may need to perform a factory reset. This will restore your controller to its original settings, and can often fix any connection issues. Here are the steps to performing a factory reset on your Wo Long Fallen Dynasty controller:

1. Turn off your console and unplug the controller.
2. Hold down the ‘Reset’ button on the back of the controller while plugging the USB cable back into the console.
3. Once the ‘Reset’ button is released, the controller should start up in ‘factory reset’ mode.
4. Follow the on-screen instructions to finish the factory reset process.

If your Wo Long Fallen Dynasty controller is not detecting your console, then there are several steps you can take to troubleshoot and fix the issue. Check the connection, reboot the console, update the firmware, replace the batteries, reset the controller, try a different controller, and check the console ports. If you follow these steps, then you should be able to get your controller connected to your console again.

Platform(s):

PlayStation 4 PS4, PlayStation 5 PS5, Windows PC, Xbox One, Xbox Series X/S

Genre(s):

Action role-playing, hack and slash

Developer(s):

Team Ninja

Publisher(s):

Koei Tecmo

Release date:

March 3, 2023

Mode:

Single-player, multiplayer

age rating (PEGI):

18+

Other Tags
video game, gameplay, price, 60fps, steam